Crossbow Technology : Technical Support

Knowledge Base

Technical Support

Product Registration

User Manuals

Application Notes

Software Downloads

Service Letters & Bulletins

Historical Products

Service Policy

Satisfaction Survey

Inertial Systems Knowledge Base



Choose Product:
Choose Sub-Product:
Enter the Search Text:		Showing 1 - 40 of 294 Solutions Found

Solution No.	Product	Solution Title
00000655	Inertial	3rd Party GPS Connection to 440 Series
00000590	Inertial	Synchronizing ITOW (2 bytes)
00000581	Inertial	NAV420/440 Hard Iron Alignment Tips
00000575	Inertial	How long does GPS lock take on the 440 Series
00000567	Inertial	What size fasteners or bolts are used with 420/440 Series products?
00000555	Inertial	How can I transform the coordinate system for a non-CG installation?
00000442	Inertial	442: Calculation of yaw angle from VG700
00000441	Inertial	441: Source code used to make Gyroview
00000438	Inertial	438: Errors in analog voltage outputs of DMU
00000437	Inertial	437: Connecting multiple accelerometers to CXLDK
00000436	Inertial	436: How water resistant are your analog tilt sensors?
00000435	Inertial	435: Impact of various mounting orientations on AHRS accuracy
00000432	Inertial	432: AHRS application in camera stabilization
00000431	Inertial	431: Accuracy of the low frequency roll-off point of the HF accelerometers
00000429	Inertial	429: DDE to use the GyroView data in real-time
00000427	Inertial	427: Pin out description for CXTILT
00000426	Inertial	426: Current and Voltage operating modes for HF series accelerometers
00000424	Inertial	424: Output loading vs. output impedance
00000423	Inertial	423: Longer serial cable for CXLDK card
00000419	Inertial	419: Is magnetic heading the only output affected by hard iron calibration?
00000416	Inertial	416: Stand-alone data logger to log the RS232 output of the DMU
00000415	Inertial	415: Temperature compensation of sensors in DMU
00000414	Inertial	414: Repeat of angle values in multiple AHRS digital packets
00000413	Inertial	413: Sign convention for DMU accelerometers
00000411	Inertial	11: Can I test the accelerometer and gyro independent of the magnetic ...
00000410	Inertial	410: Mounting accelerometers using adhesive
00000409	Inertial	409: Explanation of dynamic accuracy of AHRS400
00000408	Inertial	408: What kind of interface card should I need in order to use AccelView?
00000407	Inertial	407: Roll, Pitch and Yaw analog outputs for AHRS400
00000406	Inertial	406: Calculation of velecity and distance using ADXL202EB
00000405	Inertial	405: Shortening the cable length of accelerometers
00000404	Inertial	404: Problems with the analog output of the IMU400
00000403	Inertial	403: Effect of orientation of the accelerometer on impact measurements
00000398	Inertial	hen using angle mode: the Az and El angle in the received message goe...
00000397	Inertial	397: Non-linear tilt calculation formula for CXTA
00000392	Inertial	392: Rate gyro bias zeroing for AHRS400
00000391	Inertial	391: data packet interpretation
00000390	Inertial	390: Warm up initialization time for AHRS
00000389	Inertial	389: How do you do the continuous data packet reading in GyroView?
00000386	Inertial	386: Can accelerometers handle a certain pressure and vacuum environment

Prev 40 Next 40

Crossbow Technology has been at the vanguard of sensor technology for more than a decade, shipping hundreds of thousands of sensors to more than 4,000 customers worldwide. Today, Crossbow is a leading supplier of inertial sensors and systems for navigation and control applications in general aviation, commercial and military markets.

Advanced MEMS Technology
Patented Sensor Integration & Algorithms
FAA Certified Systems
Custom OEM Solutions
Wide Range of Catalog Products
Partnerships

Corporate Headquarters:
PH: 408.965.3300 | E: info@xbow.com

Contact Crossbow | Find A Distributor