Crossbow Technology : Eko : eKo

Order

Order Product

eKo Pro Series Kit –
The highest technology solution available at the lowest market cost
meeting today's environmental monitoring needs.

No Monthly Fees, Easy to Install and Scale
Call Today for Pricing.

Let our expert sales team help you with your order.
You can order the eKo Pro Series Kit,
or additional components by phone or email.

Contact Information:
Phone: 1-800-XBOW-TECH (1-800-926-9832)
Email: eko.sales@xbow.com

eK2100 – eKo Pro Series Kit

Kit Contents:

3 x eN2100 – eKo Nodes

1 x eB2110 – eKo Base Radio

1 x eG2100 – eKo Gateway

6 x eS1101 – Soil Moisture Potential Sensors

1 x eS1201 – Ambient Temperature & Humidity Sensor

eKo Professional Kit - 2.4 GHz

eKo Manual

eKo Datasheet

eKo Components – Sold Separately

	eN2100 – eKo Wireless Sensor Node – 2.4 GHz Up to 4 sensors can be attached to one eKo Node. The eKo Node is a fully integrated, rugged outdoor sensor package that uses an energy-efficient radio and sensors for extended battery-life and performance.
	eG2100 – eKo Gateway Pre-installed with eKoView. The eKo Gateway, eG2100, is an embedded Sensor Network gateway device. The eKo Gateway runs the Debian Linux operating system. It comes preloaded with Crossbow’s Sensor Network management and data visualization software packages, eKoView and XServe. These programs are automatically started when the gateway is turned on. eKoView, a secure web interface, for viewing your data, running reports, setting up alerts and more.
	eB2110 – eKo Base Radio with standard antenna The eKo Base Radio, eB2110, is a fully integrated package that provides the connection between eKo Sensor Nodes and the eKo Gateway. The base radio integrates a Crossbow IRIS family processor/radio board, antenna and USB interface board which is preprogrammed with Crossbow’s XMesh low-power networking protocol for communication with eKo Nodes. The USB interface is used for data transfer between the base radio and the eKoView application running inside the eKo Gateway.
	eS1101 – Soil Moisture Potential Sensor The eS1101 Watermark Sensor (granular matrix sensor) is a soil moisture sensor and soil temperature sensor. Up to four eS1101 sensors can be connected to one eKo Node to measure soil moisture at different soil depths. By monitoring the sensor measurements between irrigations, it is possible to measure the rate at which the soil is drying out. ESB Architecture – Installing a sensor is a plug-and-play process. After installing a sensor just reset the eKo Node and it scans the sensor ports to auto-identify the added sensor.
	eS1201 – Ambient Temperature & Humidity Sensor The eS1201 is a temperature/humidity sensor that measures the ambient relative humidity and air temperature. These readings are also used to calculate dew point. The sensor enclosure protects the sensor from mechanical damage, and a membrane filter protects the sensor elements from dust, dirt, and water spray.
	eS1401 – Solar Radiation Sensor (Davis 6450) The Davis Solar Radiation sensor. The eS1401 measures global radiation, both the direct and diffuse components of solar irradiance. Allows users to monitor evapotranspiration. Algorithms have been integrated into Crossbow’s eKoView interface to allow users to easily manage and make decisions based on the data collected for disease modeling and prediction.
	eS1110 – Soil Water Content Sensor (Decagon EC-5) The eS1110 uses the Decagon EC-5 which obtains volumetric water content by measuring the dielectric constant of the media through the utilization of capacitance/ frequency domain technology. It incorporated a high frequency oscillation which allows the sensor to accurately measure soil moisture in any soil with minimal salinity and textural effects.
	eS1301 – Leaf Wetness Sensor (Decagon LWS) The eS1301 is the leaf wetness sensor from Decagon. Many fungal and bacterial diseases affect plants only when moisture is present on a leaf surface. The eS1301 determines the presence and duration of canopy wetness allowing users to forecast disease and protect the plant canopy. Algorithms have been integrated into Crossbow’s eKoView interface to allow users to easily manage and make decisions based on the data collected.

Leading the revolution to connect the physical world with the digital world through wireless sensor networks, the Crossbow Solutions blog highlights innovative and exciting ways customers are using this technology.

Subscribe to RSS Feed | Visit Crossbow Blog

Corporate Headquarters:
PH: 408.965.3300 | E: info@xbow.com

Contact Crossbow | Find A Distributor